HYBRID QUICK DETAILER
Our Hybrid Quick Detailer gives you instant gloss, quickly adding a brilliant shine to your paintwork, whilst cleaning away dirt. It also adds a microscopic thin layer of hydrophobic sealant, via specialist polymer technology, which causes water to bead and run off your paintwork. This protects your paintwork from bird dropping, acid rain, bugs, road salts and other elements.
PH SCALE - PH6
- Ceramic SiO₂ Technology – Adds protection with every wipe.
- Instant Gloss & Slickness – Enhances paint depth and clarity.
- Hydrophobic Water Beading – Repels water and dirt for longer-lasting shine.
- Works On All Surfaces – Paint, glass, plastics, trim, and chrome.
- Safe For Coated Cars – Boosts existing waxes, sealants, and ceramic layer.
- Streak-Free Finish – Even in sunlight or warm conditions.
Description
Quick detailers are all about convenience, but not all are created equal.
Spray. Wipe. Done. Hybrid Quick Detailer is a fast-acting, easy-to-use spray designed to enhance gloss, boost water beading, and clean light surface contamination — all while safely topping up protection on any exterior surface. Formulated with advanced SiO₂ (silicon dioxide) ceramic technology, this high-performance detailer delivers a sleek, streak-free finish that protects as well as it shines.
Perfect for finishing off a detail, refreshing your coating between washes, or giving your vehicle that “just detailed” look before a show, Hybrid Quick Detailer adds satisfying slickness and a high-gloss finish to paintwork, glass, chrome, plastics, and more.
Why Use Hybrid Quick Detailer?
Need to bring your car’s finish back to life in seconds? Hybrid Quick Detailer is the ideal solution for adding quick gloss and slickness, while also laying down a thin layer of ceramic-based protection.
Use it between washes, after rinsing, or for quick touch-ups. It’s safe, fast, and leaves a deep, streak-free shine on every surface. Whether you’re topping up a coating or just refreshing your paint, this is your go-to.
Quick Maintenance Cleaning with No Compromise
This product isn’t just about gloss — it’s also a highly effective light cleaner. When used on lightly soiled panels, wheels, or trim, Hybrid Quick Detailer helps gently lift and encapsulate dust, fingerprints, and greasy films perfect for between-wash maintenance or pre-show clean-ups.
Thanks to the lubricating properties of the ceramic-infused formula, it also works well as part of a low-water or “rinse-free” wash routine. Simply spray, wipe, and buff to remove grime safely and revive surface protection instantly.
SiO₂ Ceramic-Infused Formula
Unlike standard detailers, this spray is infused with silicon dioxide (SiO₂) — the same active ingredient found in ceramic coatings. It creates a thin hydrophobic layer that repels water, reduces dirt adhesion, and enhances the depth of colour and shine.
You’ll see tight water beading, feel a slicker finish, and enjoy a longer-lasting clean.
Use it regularly to boost your existing wax, sealant, or ceramic coating, or apply on untreated cars for fast, short-term protection and an ultra-slick finish.
Engineered for Safe, Streak-Free Use on All Surfaces
Hybrid Quick Detailer has been developed as a versatile, surface-safe finisher that’s effective on a wide range of materials, including:
- Painted panels (gloss or satin*)
- Clear coat and lacquer
- Plastic trim
- Chrome and brightwork
- Glass and headlights
- Wheels and exterior metals
The slick formulation offers superb lubrication, allowing it to remove light grime, fingerprints, water spots, and dust without smearing — even when used in direct sunlight or humid conditions. It won’t leave behind chalky residue or greasy build up, just a clear, sharp finish every time.
*Note: Always test on matte or satin finishes before full application. This product may increase surface gloss.
Enhance Drying Immediately After Washing
Thanks to its hydrophobic formula and built-in lubricants, VP Hybrid Quick Detailer is the perfect companion for the drying stage of your wash. When sprayed lightly onto wet panels, it helps break the surface tension, causing water to bead up and roll away more easily.
This not only speeds up the drying process but also allows your drying towel to glide effortlessly across the surface, reducing the risk of contact-induced swirl marks or marring. Use it after rinsing to enhance gloss, boost protection, and leave behind a smooth, streak-free finish — all in one step.
Clean Without the Hose – Perfect for Light Maintenance or Waterless Washing
Hybrid Quick Detailer isn't just for finishing touches — it can also be used as a quick, waterless wash solution on lightly contaminated vehicles. Ideal for dry conditions, garage use, or situations where a full contact wash isn’t practical, this ceramic-infused formula is packed with lubricants and surface-safe cleaners to safely lift away dust, fingerprints, and road film without scratching your paintwork.
Will Clean:
- Light dust and loose dirt
- Fingerprints and smudges
- Water spots and drying towel marks
- Pollen, road film, and traffic dust
- Greasy marks or light grime
- Fresh bird droppings (if removed promptly)
- Wax or polish residue
- Lint, microfiber debris, or leftover buffer dust
How to Use Hybrid Quick Detailer for a Waterless Wash
- Work on one section at a time (around 2’ x 2’). Generously spray Hybrid Quick Detailer directly onto the surface until fully saturated. The goal is to lift dirt off the panel and encapsulate particles before wiping — don’t be shy with the product here.
- Using a clean, folded microfiber towel, gently wipe in straight lines to lift away dirt. Rotate or refold the towel frequently to a clean side to avoid dragging contaminants across the surface. If the towel gets too dirty, get another one.
- Take a second, dry microfiber towel and buff the panel to a streak-free shine. Use light pressure. This will bring out the gloss and enhance the slick, ceramic-infused finish.
- Continue these steps around the entire vehicle, working top to bottom. Be sure to change towels as needed — clean microfiber is essential for avoiding swirl marks and maintaining a flawless finish.
Directions for use:
Dry Use (quick detailer):
- Shake the bottle well
- Spray directly onto a panel or microfiber towel
- Gently wipe to distribute
- Buff with a clean microfiber towel for a streak-free finish
Wet Use (drying aid):
- After rinsing, spray onto wet panels
- You can either rinse or dry as normal with a microfiber drying towel
- Buff lightly to finish
FREQUENTLY ASKED QUESTIONS
-
A quick detailer is a spray-on product designed to clean light dust and enhance gloss between washes. VP Hybrid Quick Detailer goes one step further — combining SiO₂ ceramic protection with fast cleaning power to deliver a slick, high-gloss finish in minutes. It’s ideal for maintaining a polished look between washes without the need for water.
-
Not quite. Spray waxes use wax ingredients like carnauba to create a warm glow. VP Hybrid Quick Detailer uses ceramic (SiO₂) technology for better hydrophobicity, slickness, and durability — making it a smarter choice for those wanting fast shine and real protection.
-
Yes, but only on lightly contaminated surfaces. It’s great for removing dust, fingerprints, bird droppings (fresh), and water spots — but not built to replace a full contact wash. If your car has visible road film or heavy grime, wash first, then use VP Hybrid Quick Detailer to finish and protect.
-
No. VP Hybrid Quick Detailer is non-stripping, making it safe on all types of waxes, sealants, and coatings. In fact, it helps extend the life and performance of those layers by adding gloss and water beading with every use.
-
Yes — it’s built for exactly that. The ceramic-infused formula enhances your coating’s performance, boosts slickness, and restores hydrophobic behavior between maintenance washes. It’s the perfect ceramic-safe maintenance spray.
-
You can use it as often as needed — after a wash, after a drive, or before a show. Because VP Hybrid Quick Detailer is safe on all surfaces, it’s ideal for regular upkeep without fear of build-up or damage.
-
Absolutely. Mist it onto wet panels after rinsing and dry with a microfiber towel. The formula breaks surface tension, repels water, and lubricates the drying towel, helping prevent marring and reducing water spots.
-
VP Hybrid Quick Detailer is safe on:
- Paint (gloss or satin*)
- Clear coat and lacquer
- Glass and mirrors
- Plastic trim and headlights
- Chrome, metal, and wheels
It won’t stain trim or leave behind chalky residue — just a clean, slick, streak-free finish
*For matte or satin paint or wraps, test in an inconspicuous area, as it will add gloss.
-
While it won’t fix paint defects, VP Hybrid Quick Detailer can visually reduce the appearance of fine swirls by increasing gloss and depth. It creates a smoother finish that reflects light more evenly, helping mask minor imperfections temporarily.
-
Unlike basic detail sprays, VP’s formula combines ceramic-based SiO₂ technology with fast cleaning performance. That means you’re not just refreshing shine — you’re boosting protection, improving slickness, and making your car easier to clean next time. It’s professional-grade care in a bottle, without the complexity.
